ok here is what I have come up with. Hopefully this should work well..
I tested all the options and ended up going with Kelly Holsten’s suggestion from the Beneteau235.com website of terminating it at the babystay. If you lead it up farther than that it has to run near the toe rail loosely… Run to the babystay anchor point it will let you reach the pulpit but doesn’t give as much slack over the sides as if it was run all the way forward by the toe rail.
I used a figure eight knot with a bight in it to attach to a large snapshackle that hooks into the babystay attachment point… while i was at it I also changed out the babystay attachment for another large snapshackle to make it easier to get it out of the way on the fly. 🙂 I did the same for the jib attachment.
Recent Comments