|
|
||
|
Ok I got the second battery and installed it.. I had to create the jumper cable from one negative post to the other battery’s negative post and then connected it all up. So now I have two 92 ah AGM batterys wired to a OFF/1/2/Both switch.. it works well. Well I actaully got around to replacing the head.. It was very easy.. took about 10 or 15 minutes to take the old one out and about that to put the new one in… much easier than rebuilding it. and only abuot 30 dollars more expensive.. 🙂 good deal to me 🙂 picture of new head I had to use the old right angle fitting from old head to get the hose to the holding tank to go on it. The fitting on the new head was only a 45 degree angle and wouldn’t let the existing hose reach correctly. |
||
|
Copyright © 1930 Scott’s Weblogs - All Rights Reserved |
||
Recent Comments