I recently got a question about mounting my TP32 autopilot on sea puppy and here is my reply to it.
He had asked about the width and slant on the shim I made to get the cantilever arm horizontal when mounted.
I can certainly do that for you if you want but mine is not quite perfect. I can tell you that the widest is between 3/4 and 1 inch thick.. probably closer to 1″ and the thinest is 0″ inches. I will measure it Friday when I get back to the boat and can send it to you the beginning of the week when I’m back off the water. 🙂
Recent Comments