I finished running the wires for the GPS sounder.. The GPS antenna wire from the transom took a hole in the transom and then one in the bulkhead at the back of the chart table to run.
The cable from the Depth Sounder transducer took three holes through the galley cabinates to run beside the battery cables. I ended up mounting the transduce inside the boat just ahead of the older thru hull sending units for the depth finder and knot meter.. I just took 2 part epoxy and glued it down.. it seems to be working fine. Gives a very clear bottom line. 🙂 I need to read the manual a couple more times though to learn how to set all the options and use them.
Recent Comments