I got up early and started tightening up and tuning the upper and lower shrouds.. There is no adjustment on the roller furling unit. It is a fixed length. I set the uppers and lowers at the same poundage that I had her tuned to with the stock forstay and found that I was pulling the mast into a curve forward at the top of the mast.. This is a very bad thing. I also had massive aft rake compared to the just a very lot of rake sea puppy usually has. I spent most of the morning messing with it with no good results. Miriam showed up late in the afternoon while I was working on it and gave a hand also. Finally I started manufacturing new connecting plates for attaching the roller furling unit to the chain plate at the bow. A good drill for the holes and a roto zip with a metal cutting blade did a good job of creating the new plates.. lol at least they did after I got my measurements right. here is a picture of the installed furler with the new plates we made showing.
Recent Comments